MAX1480CEPI+ vs MAX1480BCPI+ 비교

다음의 상세 나란히 비교: MAX1480CEPI+ 제조: Analog Devices 및 MAX1480BCPI+ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX1480CEPI+ MAX1480BCPI+
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type 1/1 Transceiver Half (isolated RS-485/RS-422 interface) —
Supported Standards RS-485, RS-422 —
Isolation Electrically isolated (hybrid microcircuit with isolation barrier) —
Supply Architecture Single +5 V supply on the logic side powers both sides of the interface —
패키지 28-PDIP (28-pin plastic DIP, through-hole) 28-PDIP (0.600", 15.24 mm wide)
핀 수 28 —
실장 유형 Through-hole Through-Hole
Package Code / Shape DIP, rectangular —
Temperature Grade Industrial —
Driver Configuration Half-duplex, 1 driver / 1 receiver —
Driver Slew Rate Reduced-slew-rate drivers (MAX1480B/C feature) to minimize EMI —
Family Variants MAX1480A / MAX1480B / MAX1480C share the 28-pin DIP package —
Maximum Data Rate [DATA_NEEDED: maximum signaling rate for MAX1480C variant] —
Common-Mode Range [DATA_NEEDED: bus-side common-mode voltage range] —
Isolation Withstand Voltage [DATA_NEEDED: isolation withstand voltage rating] —
동작 온도 범위 [DATA_NEEDED: minimum and maximum junction/ambient operating temperature] —
Logic Supply Voltage Range [DATA_NEEDED: VCC operating range] —
RoHS 상태 unknown Compliant
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
데이터 속도 — 250 kbps
Receiver Hysteresis — 70 mV
Supply Voltage (Logic Side) — 5 V (single supply)
Isolation Voltage — 1000 Vrms (galvanic, transformer-based)
동작 온도 — -40C to +85C
Number of Nodes on Bus — Up to 32 transceivers
Slew Rate — Reduced (low-EMI drivers)
Construction — Hybrid microcircuit (CMOS + pulse transformer)
Lead-Free / Halogen-Free — [DATA_NEEDED: lead-free / halogen-free status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청