MAX14852GWE+ vs ADM2687EBRIZ Vergleich
Detaillierter Direktvergleich von MAX14852GWE+ von Analog Devices und ADM2687EBRIZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MAX14852GWE+ - 2.75kV Isolated RS-485/RS-422 Transceiver | Maxim Integrated
MAX14852GWE+ ✓ Aktiv
Spezifikationsvergleich
| Parameter | MAX14852GWE+ | ADM2687EBRIZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | RS-485/RS-422 |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $7,25 | $8,50 |
| Funktion | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Full | Half/Full |
| Data Rate (low-speed mode) | 500 kbps | — |
| Data Rate (high-speed mode) | 25 Mbps | — |
| Galvanic Isolation Rating | 2.75 kVRMS (60 s) | — |
| Supply Voltage (VVDD / VBUS) | 1.71 V to 5.5 V | — |
| ESD Protection (HBM, bus pins) | ±35 kV | — |
| Betriebstemperatur | -40 °C to +105 °C | -40°C to +85°C |
| Gehäuse | 16-pin WSOIC (7.50 mm body width) | 16-SOIC (0.295", 7.50mm Width) |
| Montageart | Surface Mount | Surface Mount |
| Fail-safe Receiver | Yes | — |
| Hot-swap Tolerant | Yes | — |
| RoHS-Status | Compliant | — |
| Isolation Technology | Maxim iso-loop (integrated transformer driver) | — |
| Isolation Voltage | — | 5000 Vrms |
| Datenrate | — | 500 kbps |
| Number of Channels | — | 3 |
| CMTI | — | 25 kV/µs |
| ESD Protection | — | ±15 kV |
| Versorgungsspannung | — | 5 V |
| Isolated Power | — | 500 mW |
| Standards Compliance | — | ANSI/TIA/EIA-485-A-98, ISO 8482:1987(E) |
| RoHS | — | Compliant |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |