MAX211CDB vs LT1039CJ Vergleich
Detaillierter Direktvergleich von MAX211CDB von Texas Instruments und LT1039CJ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDB ✓ Aktiv
Spezifikationsvergleich
| Parameter | MAX211CDB | LT1039CJ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Unknown |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,23 | $10,99 |
| Product Type | Multichannel RS-232 line driver/receiver | Triple EIA-232 line transceiver |
| Versorgungsspannung | 5 V | Up to ±15 V |
| Driver Count | 4 | — |
| Receiver Count | 5 | — |
| Maximum Data Rate | 120 kbit/s | — |
| Driver Output Swing | ±9 V | — |
| RS-232 Bus Pin ESD Protection | ±15 kV, human-body model | — |
| Standards Support | TIA/EIA-232-F and ITU V.28 | — |
| Gehäuse | 28-pin SSOP, 5.30 mm width | 18-pin DIP |
| Montageart | Surface mount | Through-hole |
| Shutdown Feature | Three driver outputs can be placed in shutdown | — |
| Power-Supply Topology | Single 5 V supply with integrated charge-pump circuitry | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Versorgungsstrom | [DATA_NEEDED: operating supply current] | — |
| Shutdown Supply Current | Low; exact value [DATA_NEEDED: shutdown supply current] | — |
| Driver Input Logic Levels | [DATA_NEEDED: driver input logic thresholds] | — |
| Receiver Output Logic Levels | [DATA_NEEDED: receiver output logic levels] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Drivers | — | 3 |
| Number of Receivers | — | 3 |
| Receiver Input Voltage | — | ±30 V |
| Driver Output Voltage | — | RS-232 levels; outputs can be driven to ±30 V without damage |
| Receiver Input Impedance | — | 30 kΩ nominal |
| Receiver Input Hysteresis | — | 0.4 V |
| Shutdown Output State | — | High impedance |
| Power-Off Output State | — | High impedance when V+ and V− are 0 V |
| Driver Logic Input | — | TTL logic input |
| Receiver Logic Output | — | TTL or CMOS compatible |
| Short Circuit Protection | — | Fully short-circuit protected outputs |
| Temperature Grade | — | [DATA_NEEDED: operating temperature range] |
| Supplier Case | — | DIP18 |