MAX211CDB vs LT1039CJ Comparação
Comparação detalhada lado a lado de MAX211CDB por Texas Instruments e LT1039CJ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDB ✓ Ativo
Comparação de especificações
| Parâmetro | MAX211CDB | LT1039CJ |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Unknown |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $3,23 | $10,99 |
| Product Type | Multichannel RS-232 line driver/receiver | Triple EIA-232 line transceiver |
| Tensão de alimentação | 5 V | Up to ±15 V |
| Driver Count | 4 | — |
| Receiver Count | 5 | — |
| Maximum Data Rate | 120 kbit/s | — |
| Driver Output Swing | ±9 V | — |
| RS-232 Bus Pin ESD Protection | ±15 kV, human-body model | — |
| Standards Support | TIA/EIA-232-F and ITU V.28 | — |
| Encapsulamento | 28-pin SSOP, 5.30 mm width | 18-pin DIP |
| Tipo de montagem | Surface mount | Through-hole |
| Shutdown Feature | Three driver outputs can be placed in shutdown | — |
| Power-Supply Topology | Single 5 V supply with integrated charge-pump circuitry | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | — |
| Corrente de alimentação | [DATA_NEEDED: operating supply current] | — |
| Shutdown Supply Current | Low; exact value [DATA_NEEDED: shutdown supply current] | — |
| Driver Input Logic Levels | [DATA_NEEDED: driver input logic thresholds] | — |
| Receiver Output Logic Levels | [DATA_NEEDED: receiver output logic levels] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Drivers | — | 3 |
| Number of Receivers | — | 3 |
| Receiver Input Voltage | — | ±30 V |
| Driver Output Voltage | — | RS-232 levels; outputs can be driven to ±30 V without damage |
| Receiver Input Impedance | — | 30 kΩ nominal |
| Receiver Input Hysteresis | — | 0.4 V |
| Shutdown Output State | — | High impedance |
| Power-Off Output State | — | High impedance when V+ and V− are 0 V |
| Driver Logic Input | — | TTL logic input |
| Receiver Logic Output | — | TTL or CMOS compatible |
| Short Circuit Protection | — | Fully short-circuit protected outputs |
| Temperature Grade | — | [DATA_NEEDED: operating temperature range] |
| Supplier Case | — | DIP18 |