MAX232DWR vs SP232ECT-L Vergleich
Detaillierter Direktvergleich von MAX232DWR von Texas Instruments und SP232ECT-L von MaxLinear. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX232DWR | SP232ECT-L |
|---|---|---|
| Marke | Texas Instruments | MaxLinear |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Dual RS-232 driver/receiver transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Versorgungsspannung | 5 V | — |
| Maximum Data Rate | 120 kbit/s | [DATA_NEEDED: maximum data rate] |
| RS-232 Output Level | ±9 V | — |
| Receiver Input Range | ±30 V | — |
| ESD Protection | ±2 kV | +/-15 kV |
| Receiver Threshold | 1.3 V typical | — |
| Receiver Hysteresis | 0.5 V typical | — |
| Versorgungsstrom | 8 mA typical | — |
| Interface Standard | TIA/EIA-232-F | — |
| V.28 Standard | ITU Recommendation V.28 | — |
| Gehäuse | 16-pin SOIC | 16-SOIC (SOIC16W) |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Supply Current, Maximum | [DATA_NEEDED: maximum supply current] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | 2/2 full RS-232 transceiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply | — | 5 V |
| Protocol | — | RS-232 |
| Standard Compatibility | — | RS-232D and ITU V.28 |
| Betriebstemperatur | — | 0 C to +70 C |
| Package Body Width | — | 7.50 mm |
| Package Length | — | 10.3 mm |
| Packaging | — | Tape and Reel |
| Internal Technology | — | CMOS |
| RoHS | — | Yes |
| External Capacitors | — | [DATA_NEEDED: external capacitor requirement] |
| Driver Output Level | — | [DATA_NEEDED: driver output levels] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |