MAX232DWR vs SP232ECT-L Comparaison
Comparaison détaillée côte à côte de MAX232DWR par Texas Instruments et SP232ECT-L par MaxLinear. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX232DWR | SP232ECT-L |
|---|---|---|
| Marque | Texas Instruments | MaxLinear |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual RS-232 driver/receiver transceiver | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Tension d'alimentation | 5 V | — |
| Maximum Data Rate | 120 kbit/s | [DATA_NEEDED: maximum data rate] |
| RS-232 Output Level | ±9 V | — |
| Receiver Input Range | ±30 V | — |
| ESD Protection | ±2 kV | +/-15 kV |
| Receiver Threshold | 1.3 V typical | — |
| Receiver Hysteresis | 0.5 V typical | — |
| Courant d'alimentation | 8 mA typical | — |
| Interface Standard | TIA/EIA-232-F | — |
| V.28 Standard | ITU Recommendation V.28 | — |
| Boîtier | 16-pin SOIC | 16-SOIC (SOIC16W) |
| Type de montage | Surface mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Supply Current, Maximum | [DATA_NEEDED: maximum supply current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | 2/2 full RS-232 transceiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply | — | 5 V |
| Protocol | — | RS-232 |
| Standard Compatibility | — | RS-232D and ITU V.28 |
| Température de fonctionnement | — | 0 C to +70 C |
| Package Body Width | — | 7.50 mm |
| Package Length | — | 10.3 mm |
| Packaging | — | Tape and Reel |
| Internal Technology | — | CMOS |
| RoHS | — | Yes |
| External Capacitors | — | [DATA_NEEDED: external capacitor requirement] |
| Driver Output Level | — | [DATA_NEEDED: driver output levels] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |