MAX3485CPA+ vs ADM3485EAN Vergleich

Detaillierter Direktvergleich von MAX3485CPA+ von Maxim Integrated und ADM3485EAN von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ Aktiv
Analog Devices
ADM3485EAN ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN ✓ Aktiv

Spezifikationsvergleich

Parameter MAX3485CPA+ ADM3485EAN
Marke Maxim Integrated Analog Devices
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Aktiv
Product Type RS-485/RS-422 transceiver RS-485/RS-422 differential transceiver
Versorgungsspannung 3.3 V 3.3 V
Datenrate Up to 10 Mbps —
Driver and Receiver Count 1 driver and 1 receiver —
Communication Standard RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
Gehäuse 8-pin PDIP 8-pin SOIC
Montageart Through hole Surface mount
Transceiver Configuration Half-duplex transceiver —
Low-Power Operation 3.3 V low-power transceiver —
EMI and Reflection Control Slew-rate-limited driver intended to minimize EMI and cable reflections —
Betriebstemperatur [DATA_NEEDED: operating temperature range] —
ESD Protection [DATA_NEEDED: device ESD rating] 15 kV
Versorgungsstrom [DATA_NEEDED: typical and maximum supply current] —
Driver Differential Output [DATA_NEEDED: differential output voltage specifications] —
Receiver Input Range [DATA_NEEDED: receiver differential input range] —
Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] Full common-mode range
Slew Rate [DATA_NEEDED: driver slew-rate value] —
RoHS-Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Maximum Data Rate — 20 Mbps
Communication Mode — Half-duplex
Standards Compliance — TIA/EIA RS-422 and RS-485
Receiver Input Impedance — 19 kΩ
Maximum Transceivers on Bus — 19 transceivers
Driver and Receiver Enable — Yes
Short-Circuit Protection — Yes
Supply Class — Low-power 3.3 V transceiver

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern