MAX3485CPA+ vs ADM3485EAN Comparaison

Comparaison détaillée côte à côte de MAX3485CPA+ par Maxim Integrated et ADM3485EAN par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ Actif
Analog Devices
ADM3485EAN ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN ✓ Actif

Comparaison des spécifications

Paramètre MAX3485CPA+ ADM3485EAN
Marque Maxim Integrated Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 transceiver RS-485/RS-422 differential transceiver
Tension d'alimentation 3.3 V 3.3 V
Débit de données Up to 10 Mbps —
Driver and Receiver Count 1 driver and 1 receiver —
Communication Standard RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
Boîtier 8-pin PDIP 8-pin SOIC
Type de montage Through hole Surface mount
Transceiver Configuration Half-duplex transceiver —
Low-Power Operation 3.3 V low-power transceiver —
EMI and Reflection Control Slew-rate-limited driver intended to minimize EMI and cable reflections —
Température de fonctionnement [DATA_NEEDED: operating temperature range] —
ESD Protection [DATA_NEEDED: device ESD rating] 15 kV
Courant d'alimentation [DATA_NEEDED: typical and maximum supply current] —
Driver Differential Output [DATA_NEEDED: differential output voltage specifications] —
Receiver Input Range [DATA_NEEDED: receiver differential input range] —
Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] Full common-mode range
Slew Rate [DATA_NEEDED: driver slew-rate value] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Maximum Data Rate — 20 Mbps
Communication Mode — Half-duplex
Standards Compliance — TIA/EIA RS-422 and RS-485
Receiver Input Impedance — 19 kΩ
Maximum Transceivers on Bus — 19 transceivers
Driver and Receiver Enable — Yes
Short-Circuit Protection — Yes
Supply Class — Low-power 3.3 V transceiver

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis