MAX3485CSA+ vs MAX3485ECSA+ Vergleich
Detaillierter Direktvergleich von MAX3485CSA+ von Maxim Integrated und MAX3485ECSA+ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX3485CSA+ | MAX3485ECSA+ |
|---|---|---|
| Marke | Maxim Integrated | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Unknown | Aktiv |
| Product Type | RS-485/RS-422 transceiver | Half-duplex RS-485/RS-422 transceiver |
| Versorgungsspannung | 3.3 V | 3.3 V |
| Datenrate | 10 Mbps | — |
| Duplex Mode | Half-duplex | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Supported Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| Driver Feature | Slew-rate-limited driver family feature | — |
| Short-Circuit Protection | Short-circuit current limited driver | — |
| Thermisches Abschalten | Driver enters high-impedance state during thermal shutdown | — |
| Receiver Feature | Fail-safe receiver input | — |
| Gehäuse | 8-SOIC, 0.154 inch, 3.90 mm width | 8-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | 0C to +70C | [DATA_NEEDED: operating temperature range] |
| Channel Direction | 1 transmitter and 1 receiver | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | ±15 kV |
| Receiver Input Common-Mode Range | [DATA_NEEDED: receiver input common-mode range] | — |
| Versorgungsstrom | [DATA_NEEDED: operating and quiescent supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Logic Output Levels | [DATA_NEEDED: logic output voltage levels] | — |
| Termination Requirement | [DATA_NEEDED: termination and biasing requirements] | — |
| Driver/Receiver Count | — | 1 driver and 1 receiver |
| Maximum Data Rate | — | 12 Mbps |
| Driver Edge Control | — | Slew-rate limited |
| Driver Output Current | — | [DATA_NEEDED: differential output current] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Shutdown and Enable Control | — | [DATA_NEEDED: DE and active-low RE control details] |
| RoHS-Status | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |