MAX3485CSA+ vs MAX3485ECSA+ Comparación
Comparación detallada lado a lado de MAX3485CSA+ por Maxim Integrated y MAX3485ECSA+ por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | MAX3485CSA+ | MAX3485ECSA+ |
|---|---|---|
| Marca | Maxim Integrated | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Unknown | Activo |
| Product Type | RS-485/RS-422 transceiver | Half-duplex RS-485/RS-422 transceiver |
| Tensión de alimentación | 3.3 V | 3.3 V |
| Velocidad de datos | 10 Mbps | — |
| Duplex Mode | Half-duplex | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Supported Standards | RS-485 and RS-422 | RS-485 and RS-422 |
| Driver Feature | Slew-rate-limited driver family feature | — |
| Short-Circuit Protection | Short-circuit current limited driver | — |
| Apagado térmico | Driver enters high-impedance state during thermal shutdown | — |
| Receiver Feature | Fail-safe receiver input | — |
| Encapsulado | 8-SOIC, 0.154 inch, 3.90 mm width | 8-pin SOIC |
| Tipo de montaje | Surface mount | Surface mount |
| Rango de temperatura de funcionamiento | 0C to +70C | [DATA_NEEDED: operating temperature range] |
| Channel Direction | 1 transmitter and 1 receiver | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | ±15 kV |
| Receiver Input Common-Mode Range | [DATA_NEEDED: receiver input common-mode range] | — |
| Corriente de alimentación | [DATA_NEEDED: operating and quiescent supply current] | [DATA_NEEDED: typical and maximum supply current] |
| Logic Output Levels | [DATA_NEEDED: logic output voltage levels] | — |
| Termination Requirement | [DATA_NEEDED: termination and biasing requirements] | — |
| Driver/Receiver Count | — | 1 driver and 1 receiver |
| Maximum Data Rate | — | 12 Mbps |
| Driver Edge Control | — | Slew-rate limited |
| Driver Output Current | — | [DATA_NEEDED: differential output current] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Shutdown and Enable Control | — | [DATA_NEEDED: DE and active-low RE control details] |
| Estado RoHS | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |