MAX3485ESA+ vs SN65HVD70DGSR Vergleich
Detaillierter Direktvergleich von MAX3485ESA+ von Analog Devices und SN65HVD70DGSR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ AktivSpezifikationsvergleich
| Parameter | MAX3485ESA+ | SN65HVD70DGSR |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,45 | $1,55 |
| Product Type | RS-485/RS-422 transceiver | RS-485 / RS-422 Transceiver |
| Versorgungsspannung | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate-limited true transceiver | — |
| Gehäuse | 8-pin SOIC | 10-pin VSSOP (DGS) with PowerPAD |
| Montageart | Surface mount | Surface Mount |
| Power Class | Low-power transceiver | — |
| Production Status | PRODUCTION | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Versorgungsstrom | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Datenrate | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Receiver Hysteresis | — | 50 mV (typical) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Active-high |
| Receiver Enable | — | Active-low |
| Standby Current | — | < 5 µA (both disabled) |