MAX3485ESA+ vs SN65HVD70DGSR Comparación
Comparación detallada lado a lado de MAX3485ESA+ por Analog Devices y SN65HVD70DGSR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ ActivoComparación de especificaciones
| Parámetro | MAX3485ESA+ | SN65HVD70DGSR |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,45 | $1,55 |
| Product Type | RS-485/RS-422 transceiver | RS-485 / RS-422 Transceiver |
| Tensión de alimentación | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate-limited true transceiver | — |
| Encapsulado | 8-pin SOIC | 10-pin VSSOP (DGS) with PowerPAD |
| Tipo de montaje | Surface mount | Surface Mount |
| Power Class | Low-power transceiver | — |
| Production Status | PRODUCTION | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Corriente de alimentación | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Velocidad de datos | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Receiver Hysteresis | — | 50 mV (typical) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Active-high |
| Receiver Enable | — | Active-low |
| Standby Current | — | < 5 µA (both disabled) |