MAX3485ESA+T vs SN65HVD73DGS Vergleich
Detaillierter Direktvergleich von MAX3485ESA+T von Analog Devices und SN65HVD73DGS von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+T ✓ AktivTexas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ AktivSpezifikationsvergleich
| Parameter | MAX3485ESA+T | SN65HVD73DGS |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-485/RS-422 transceiver | — |
| Versorgungsspannung | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Duplex Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | — |
| Gehäuse | 8-SOIC | 10-VSSOP (DGS) 3.0 mm × 3.0 mm |
| Package Dimensions | 3.90 mm width | — |
| Montageart | Surface mount | Surface Mount |
| Ordering Package | Tape and reel | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | -7 V to +12 V |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3 V to 3.6 V |
| Datenrate | — | 20 Mbps (max) |
| ESD Protection (Bus Pins) | — | 12 kV IEC 61000-4-2 contact discharge |
| Receiver Input Impedance | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Yes, active-high (DE pin) |
| Receiver Enable | — | Yes, active-low (RE pin) |
| Betriebstemperatur | — | -40 °C to +125 °C |
| MSL-Level | — | 2 |
| RoHS-Status | — | Compliant |