MAX3485ESA+T vs SN65HVD73DGS Comparación
Comparación detallada lado a lado de MAX3485ESA+T por Analog Devices y SN65HVD73DGS por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+T ✓ ActivoTexas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ ActivoComparación de especificaciones
| Parámetro | MAX3485ESA+T | SN65HVD73DGS |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 transceiver | — |
| Tensión de alimentación | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Duplex Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | — |
| Encapsulado | 8-SOIC | 10-VSSOP (DGS) 3.0 mm × 3.0 mm |
| Package Dimensions | 3.90 mm width | — |
| Tipo de montaje | Surface mount | Surface Mount |
| Ordering Package | Tape and reel | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | -7 V to +12 V |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3 V to 3.6 V |
| Velocidad de datos | — | 20 Mbps (max) |
| ESD Protection (Bus Pins) | — | 12 kV IEC 61000-4-2 contact discharge |
| Receiver Input Impedance | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Yes, active-high (DE pin) |
| Receiver Enable | — | Yes, active-low (RE pin) |
| Temperatura de funcionamiento | — | -40 °C to +125 °C |
| Nivel MSL | — | 2 |
| Estado RoHS | — | Compliant |