MAX485ESA+ vs DS90C402M Vergleich
Detaillierter Direktvergleich von MAX485ESA+ von Analog Devices und DS90C402M von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MAX485ESA+ | DS90C402M |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Funktion | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Versorgungsspannung | 4.75 V to 5.25 V (5 V nominal) | — |
| Datenrate | 2.5 Mbps | — |
| Supply Current (unloaded) | 120 µA to 500 µA | — |
| Receiver Hysteresis | 70 mV (typ) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold (V_TH) | -0.2 V min / +0.2 V max | — |
| ESD Protection (HBM, driver output) | ±15 kV (per datasheet) | — |
| Unit Load | 1/8 (up to 256 transceivers on bus) | — |
| Betriebstemperatur | -40 °C to +85 °C | — |
| Gehäuse | 8-SOIC (SOIC-8) | 8-lead SOIC |
| Montageart | Surface Mount | Surface mount |
| RoHS-Status | Compliant (per Maxim/ADI datasheet suffix '+') | [DATA_NEEDED: RoHS status] |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topologie | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Anzahl der Pins | — | 8 |
| Betriebsversorgungsspannung | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |