MAX485ESA+ vs DS90C402M مقایسه
مقایسه دقیق کنار به کنار MAX485ESA+ توسط Analog Devices و DS90C402M توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | MAX485ESA+ | DS90C402M |
|---|---|---|
| برند | Analog Devices | Texas Instruments |
| دسته‌بندی | Interface ICs | Interface ICs |
| وضعیت چرخه عمر | فعال | فعال |
| عملکرد | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| ولتاژ تغذیه | 4.75 V to 5.25 V (5 V nominal) | — |
| نرخ داده | 2.5 Mbps | — |
| Supply Current (unloaded) | 120 µA to 500 µA | — |
| Receiver Hysteresis | 70 mV (typ) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold (V_TH) | -0.2 V min / +0.2 V max | — |
| ESD Protection (HBM, driver output) | ±15 kV (per datasheet) | — |
| Unit Load | 1/8 (up to 256 transceivers on bus) | — |
| دمای کاری | -40 °C to +85 °C | — |
| بسته‌بندی | 8-SOIC (SOIC-8) | 8-lead SOIC |
| نوع نصب | Surface Mount | Surface mount |
| وضعیت RoHS | Compliant (per Maxim/ADI datasheet suffix '+') | [DATA_NEEDED: RoHS status] |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| توپولوژی | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| تعداد پین‌ها | — | 8 |
| ولتاژ تغذیه کاری | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| جریان تغذیه | — | [DATA_NEEDED: supply current] |
| محدوده دمای کاری | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |