MCZ33742EGR2 vs MCZ33742SEG Vergleich
Detaillierter Direktvergleich von MCZ33742EGR2 von NXP Semiconductors und MCZ33742SEG von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP
MCZ33742EGR2 ✓ AktivSpezifikationsvergleich
| Parameter | MCZ33742EGR2 | MCZ33742SEG |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Voltage Regulators | Power Management |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,10 | $3,35 |
| Product Type | System Basis Chip (SBC) with HS-CAN Transceiver | — |
| Manufacturer | Freescale / NXP Semiconductors | — |
| Supply Voltage (VBAT) | 5.5 V to 18 V | — |
| Versorgungsstrom | 42 mA (typical operating) | — |
| CAN Data Rate | 1 Mbps (High-Speed CAN 2.0b) | 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5) |
| Supported Bus Voltages | 5 V / 9 V / 12 V / 15 V / 18 V / 24 V (12 V automotive nominal) | — |
| Low-Power Modes | Sleep / Standby / Stop | — |
| Control Interface | SPI | — |
| Integrated Functions | 5V regulator, CAN transceiver, watchdog, voltage monitoring, reset generator | — |
| Gehäuse | 28-SOIC Wide Body (0.295 inch, 7.50 mm width) | 28-SOIC (0.295" / 7.50 mm width) |
| Montageart | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | Tube |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Compliance / Standard | CAN 2.0b compliant; ISO 11898-2/5 physical layer | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant (NXP product family standard) | Compliant |
| Funktion | — | System Basis Chip with HS-CAN Transceiver & 5.0 V LDO |
| Supply Voltage (VCC) | — | 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated) |
| Supply Current (typ) | — | 42 mA |
| SPI Control Frequency | — | up to 4.0 MHz |
| On-board LDO Output Voltage | — | 5.0 V (fixed) |
| LDO Current Limit | — | Yes (with current limiting) |
| Overtemperature Prewarning | — | Yes |
| Reset Output | — | Yes (LDO output monitoring & reset) |
| Output Drive Type | — | High-side drive with sense input |
| Bus Diagnostic | — | TXD dominant timeout, bus-fault detection |