MCZ33742EGR2 vs MCZ33742SEG Сравнение
Подробное сравнение бок о бок MCZ33742EGR2 от NXP Semiconductors и MCZ33742SEG от NXP Semiconductors. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
NXP Semiconductors
MCZ33742EGR2 - System Basis Chip w/ HS-CAN Transceiver | NXP
MCZ33742EGR2 ✓ АктивенNXP Semiconductors
MCZ33742SEG - SBC with HS-CAN & 5V LDO | NXP Semiconductors
MCZ33742SEG ✓ АктивенСравнение характеристик
| Параметр | MCZ33742EGR2 | MCZ33742SEG |
|---|---|---|
| Бренд | NXP Semiconductors | NXP Semiconductors |
| Категория | Voltage Regulators | Power Management |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $4,10 | $3,35 |
| Product Type | System Basis Chip (SBC) with HS-CAN Transceiver | — |
| Manufacturer | Freescale / NXP Semiconductors | — |
| Supply Voltage (VBAT) | 5.5 V to 18 V | — |
| Ток потребления | 42 mA (typical operating) | — |
| CAN Data Rate | 1 Mbps (High-Speed CAN 2.0b) | 1.0 Mbps (CAN 2.0A/B compliant, ISO 11898-5) |
| Supported Bus Voltages | 5 V / 9 V / 12 V / 15 V / 18 V / 24 V (12 V automotive nominal) | — |
| Low-Power Modes | Sleep / Standby / Stop | — |
| Control Interface | SPI | — |
| Integrated Functions | 5V regulator, CAN transceiver, watchdog, voltage monitoring, reset generator | — |
| Корпус | 28-SOIC Wide Body (0.295 inch, 7.50 mm width) | 28-SOIC (0.295" / 7.50 mm width) |
| Тип монтажа | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | Tube |
| Рабочая температура | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Compliance / Standard | CAN 2.0b compliant; ISO 11898-2/5 physical layer | — |
| Уровень MSL | [DATA_NEEDED: MSL rating] | — |
| Статус RoHS | Compliant (NXP product family standard) | Compliant |
| Функция | — | System Basis Chip with HS-CAN Transceiver & 5.0 V LDO |
| Supply Voltage (VCC) | — | 5.5 V to 18 V (5.5 V–27 V tolerant, 40 V load-dump rated) |
| Supply Current (typ) | — | 42 mA |
| SPI Control Frequency | — | up to 4.0 MHz |
| On-board LDO Output Voltage | — | 5.0 V (fixed) |
| LDO Current Limit | — | Yes (with current limiting) |
| Overtemperature Prewarning | — | Yes |
| Reset Output | — | Yes (LDO output monitoring & reset) |
| Output Drive Type | — | High-side drive with sense input |
| Bus Diagnostic | — | TXD dominant timeout, bus-fault detection |