MMA1250D vs MMA1270D Vergleich
Detaillierter Direktvergleich von MMA1250D von NXP Semiconductors und MMA1270D von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MMA1270D - ±2.5g Z-Axis Accelerometer | NXP SOIC-16
MMA1270D ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | MMA1250D | MMA1270D |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motion Sensors | Motion Sensors |
| Lebenszyklusstatus | Obsolete | Letzte Kaufgelegenheit |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,55 | $7,40 |
| Sensortyp | Accelerometer, Z-axis single-axis | Accelerometer (MEMS, capacitive) |
| Acceleration Range | ±5 g | ±2.5 g |
| Axis | Z (vertical / out-of-plane) | Z (single-axis) |
| Sensing Technology | Capacitive MEMS (silicon micromachined) | — |
| Ausgangstyp | Analog, ratiometric voltage | Analog, ratiometric |
| Supply Voltage (VDD) | 4.75 V to 5.25 V | — |
| Sensitivity (nominal) | [DATA_NEEDED: sensitivity V/g] | — |
| Zero-g Offset (nominal) | 2.5 V (at VDD = 5 V, ratiometric) | — |
| Filter Type | On-chip 2-pole low-pass filter | — |
| Filter Cut-off Frequency (-3 dB) | 50 Hz | — |
| Self-Test | Yes - system-level, logic input | Yes (ST pin, active-high) |
| Betriebstemperaturbereich | -40 °C to +105 °C | — |
| Gehäuse | 16-pin SOIC (SOP-16), surface mount | SOIC-16 (Dw), surface mount |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Non-Compliant (contains lead, per DigiChip listing) | RoHS Non-Compliant (historical datasheet note) |
| Lead-Free Status | Contains Lead | Contains Lead (historical datasheet note) |
| Temperature Grade | Automotive | — |
| Sensitivity | — | 750 mV/g typical (712.5–787.5 mV/g) |
| Versorgungsspannung | — | 4.75 V to 5.25 V |
| Zero-g Output (typ.) | — | 2.5 V (Vdd/2) |
| Bandwidth | — | 50 Hz (2-pole low-pass filter) |
| Betriebstemperatur | — | -40 °C to +85 °C (industrial) |
| Cross-Axis Sensitivity | — | [DATA_NEEDED: cross-axis sensitivity %] |