MMA1250D vs MMA1270D Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MMA1250D disebabkan oleh NXP Semiconductors dan MMA1270D disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
NXP Semiconductors
MMA1270D - ±2.5g Z-Axis Accelerometer | NXP SOIC-16
MMA1270D ⚠ Bahagian terakhir untuk beliPengandingan Spesifikasi
| Parametr | MMA1250D | MMA1270D |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | Masa Terakhir Dibeli |
| Jenis Sensus | Accelerometer, Z-axis single-axis | Accelerometer (MEMS, capacitive) |
| Acceleration Range | ±5 g | ±2.5 g |
| Axis | Z (vertical / out-of-plane) | Z (single-axis) |
| Sensing Technology | Capacitive MEMS (silicon micromachined) | — |
| Jenis Output | Analog, ratiometric voltage | Analog, ratiometric |
| Supply Voltage (VDD) | 4.75 V to 5.25 V | — |
| Sensitivity (nominal) | [DATA_NEEDED: sensitivity V/g] | — |
| Zero-g Offset (nominal) | 2.5 V (at VDD = 5 V, ratiometric) | — |
| Filter Type | On-chip 2-pole low-pass filter | — |
| Filter Cut-off Frequency (-3 dB) | 50 Hz | — |
| Self-Test | Yes - system-level, logic input | Yes (ST pin, active-high) |
| Gambaran Suhu Operasi | -40 °C to +105 °C | — |
| Kemasan | 16-pin SOIC (SOP-16), surface mount | SOIC-16 (Dw), surface mount |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Aras MSL | [DATA_NEEDED: MSL rating] | — |
| Status RoHS | Non-Compliant (contains lead, per DigiChip listing) | RoHS Non-Compliant (historical datasheet note) |
| Lead-Free Status | Contains Lead | Contains Lead (historical datasheet note) |
| Temperature Grade | Automotive | — |
| Sensitivity | — | 750 mV/g typical (712.5–787.5 mV/g) |
| Tegangan Pemberi Arus | — | 4.75 V to 5.25 V |
| Zero-g Output (typ.) | — | 2.5 V (Vdd/2) |
| Bandwidth | — | 50 Hz (2-pole low-pass filter) |
| Suhu Operasi | — | -40 °C to +85 °C (industrial) |
| Cross-Axis Sensitivity | — | [DATA_NEEDED: cross-axis sensitivity %] |