MMA6233QR2 vs MMA6260QR2 Vergleich
Detaillierter Direktvergleich von MMA6233QR2 von NXP Semiconductors und MMA6260QR2 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoleteSpezifikationsvergleich
| Parameter | MMA6233QR2 | MMA6260QR2 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motion Sensors | Motion Sensors |
| Lebenszyklusstatus | Obsolete | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,77 | $4,65 |
| Sensortyp | Accelerometer, Dual-Axis (X, Y) | — |
| Full-Scale Range | ±10g (±6g via g-select) | — |
| Sensitivity | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) | [DATA_NEEDED: sensitivity V/g] |
| Ausgangstyp | Analog, ratiometric | Analog, ratiometric |
| Output Voltage at 0g | VDD/2 | — |
| Bandwidth | 900 Hz (maximum) | 50 Hz (1-pole low-pass, factory set) |
| Supply Voltage (VDD) | 3.0 V to 5.25 V | — |
| Versorgungsstrom | 2.5 mA (typical, [DATA_NEEDED: max]) | [DATA_NEEDED: Idd] |
| Betriebstemperatur | -20C to +85C | -40 °C to +85 °C |
| Rauschdichte | [DATA_NEEDED: noise density] | — |
| Nonlinearity | [DATA_NEEDED: nonlinearity %FS] | — |
| Self-Test | Yes (active-high logic input) | Yes (logic-high on ST pin) |
| g-Select Input | Yes (±10g or ±6g selection) | — |
| Gehäuse | 16-pin QFN-EP (6x6 mm) | 16-QFN-EP (6x6 mm) |
| Montageart | Surface Mount | Surface Mount |
| Filter Type | 1-pole low-pass (factory-set cut-off) | — |
| RoHS-Status | Compliant | RoHS Compliant (per Digchip) |
| Lead-Free Status | Contains Lead (NXP datasheet note) | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| Type | — | Accelerometer, Dual Axis (X, Y) |
| Acceleration Range | — | ±1.5 g |
| Axis | — | X, Y (dual) |
| Versorgungsspannung | — | [DATA_NEEDED: Vdd range] |
| g-Select Pins | — | Yes (4 sensitivity options) |
| Lead Status | — | Contains Lead (per Digchip, prior to conversion) |