MMA6233QR2 vs MMA6260QR2 비교
다음의 상세 나란히 비교: MMA6233QR2 제조: NXP Semiconductors 및 MMA6260QR2 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 Obsolete사양 비교
| 파라미터 | MMA6233QR2 | MMA6260QR2 |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Motion Sensors | Motion Sensors |
| 수명 주기 상태 | Obsolete | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $4.77 | $4.65 |
| 센서 유형 | Accelerometer, Dual-Axis (X, Y) | — |
| Full-Scale Range | ±10g (±6g via g-select) | — |
| Sensitivity | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) | [DATA_NEEDED: sensitivity V/g] |
| 출력 유형 | Analog, ratiometric | Analog, ratiometric |
| Output Voltage at 0g | VDD/2 | — |
| Bandwidth | 900 Hz (maximum) | 50 Hz (1-pole low-pass, factory set) |
| Supply Voltage (VDD) | 3.0 V to 5.25 V | — |
| 공급 전류 | 2.5 mA (typical, [DATA_NEEDED: max]) | [DATA_NEEDED: Idd] |
| 동작 온도 | -20C to +85C | -40 °C to +85 °C |
| 노이즈 밀도 | [DATA_NEEDED: noise density] | — |
| Nonlinearity | [DATA_NEEDED: nonlinearity %FS] | — |
| Self-Test | Yes (active-high logic input) | Yes (logic-high on ST pin) |
| g-Select Input | Yes (±10g or ±6g selection) | — |
| 패키지 | 16-pin QFN-EP (6x6 mm) | 16-QFN-EP (6x6 mm) |
| 실장 유형 | Surface Mount | Surface Mount |
| Filter Type | 1-pole low-pass (factory-set cut-off) | — |
| RoHS 상태 | Compliant | RoHS Compliant (per Digchip) |
| Lead-Free Status | Contains Lead (NXP datasheet note) | — |
| MSL 레벨 | [DATA_NEEDED: MSL rating] | — |
| Type | — | Accelerometer, Dual Axis (X, Y) |
| Acceleration Range | — | ±1.5 g |
| Axis | — | X, Y (dual) |
| 공급 전압 | — | [DATA_NEEDED: Vdd range] |
| g-Select Pins | — | Yes (4 sensitivity options) |
| Lead Status | — | Contains Lead (per Digchip, prior to conversion) |