MMA7330LR1 vs MMA7360LR1 Vergleich
Detaillierter Direktvergleich von MMA7330LR1 von NXP Semiconductors und MMA7360LR1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MMA7330LR1 | MMA7360LR1 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motion Sensors | Motion Sensors |
| Lebenszyklusstatus | Obsolete | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,76 | $3,42 |
| Sensortyp | Accelerometer, 3-axis | 3-Axis Capacitive MEMS Accelerometer |
| Ausgangstyp | Analog voltage (ratiometric) | Analog, ratiometric (X, Y, Z) |
| Axes Measured | X, Y, Z | — |
| Acceleration Range | ±4g (g-Select low), ±12g (g-Select high) | ±1.5g, ±6g (selectable via g-Select pin) |
| Sensitivity (±4g mode) | 800 mV/g (typical at Vdd=3.3 V) | — |
| Sensitivity (±12g mode) | 200 mV/g (typical at Vdd=3.3 V) | — |
| Bandwidth (X, Y) | 400 Hz | — |
| Bandwidth (Z) | 300 Hz | — |
| Supply Voltage (Vdd) | 2.2 V to 3.5 V | — |
| Supply Voltage (VddIO) | 1.71 V to 3.5 V | — |
| Versorgungsstrom | 400 µA typical | — |
| Rauschdichte | 1.5 mg/√Hz typical | — |
| Betriebstemperatur | -40 °C to +85 °C | -40C to +85C |
| Self-Test | Yes (active high) | — |
| Zero-g Offset (factory trim) | Pre-trimmed, no external components required | — |
| Gehäuse | 14-LGA (3 mm x 5 mm x 1 mm) | 14-LGA (3 mm x 5 mm x 1 mm) |
| Montageart | Surface Mount | Surface Mount |
| Shock Survival | 10,000 g (per NXP test methodology) | — |
| Filter | 1-pole low-pass on-chip | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant (Lead Free) |
| Sensitivity (±1.5g mode, Vdd=3.3V) | — | 800 mV/g |
| Sensitivity (±6g mode, Vdd=3.3V) | — | 200 mV/g |
| Bandwidth (X, Y axes) | — | 400 Hz |
| Bandwidth (Z axis) | — | 300 Hz |
| Versorgungsspannung | — | 2.2 V to 3.6 V |
| Supply Current (typical) | — | 400 uA |
| Self-Test Current | — | 1.5 mA (active) |
| 0g-Detect Output | — | Yes (linear freefall interrupt) |
| g-Select Input | — | Yes (logic high = ±6g, logic low = ±1.5g) |