MMA7330LR1 vs MMA7360LR1 Comparaison
Comparaison détaillée côte à côte de MMA7330LR1 par NXP Semiconductors et MMA7360LR1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MMA7330LR1 | MMA7360LR1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,76 | $3,42 |
| Type de capteur | Accelerometer, 3-axis | 3-Axis Capacitive MEMS Accelerometer |
| Type de sortie | Analog voltage (ratiometric) | Analog, ratiometric (X, Y, Z) |
| Axes Measured | X, Y, Z | — |
| Acceleration Range | ±4g (g-Select low), ±12g (g-Select high) | ±1.5g, ±6g (selectable via g-Select pin) |
| Sensitivity (±4g mode) | 800 mV/g (typical at Vdd=3.3 V) | — |
| Sensitivity (±12g mode) | 200 mV/g (typical at Vdd=3.3 V) | — |
| Bandwidth (X, Y) | 400 Hz | — |
| Bandwidth (Z) | 300 Hz | — |
| Supply Voltage (Vdd) | 2.2 V to 3.5 V | — |
| Supply Voltage (VddIO) | 1.71 V to 3.5 V | — |
| Courant d'alimentation | 400 µA typical | — |
| Densité de bruit | 1.5 mg/√Hz typical | — |
| Température de fonctionnement | -40 °C to +85 °C | -40C to +85C |
| Self-Test | Yes (active high) | — |
| Zero-g Offset (factory trim) | Pre-trimmed, no external components required | — |
| Boîtier | 14-LGA (3 mm x 5 mm x 1 mm) | 14-LGA (3 mm x 5 mm x 1 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Shock Survival | 10,000 g (per NXP test methodology) | — |
| Filter | 1-pole low-pass on-chip | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant (Lead Free) |
| Sensitivity (±1.5g mode, Vdd=3.3V) | — | 800 mV/g |
| Sensitivity (±6g mode, Vdd=3.3V) | — | 200 mV/g |
| Bandwidth (X, Y axes) | — | 400 Hz |
| Bandwidth (Z axis) | — | 300 Hz |
| Tension d'alimentation | — | 2.2 V to 3.6 V |
| Supply Current (typical) | — | 400 uA |
| Self-Test Current | — | 1.5 mA (active) |
| 0g-Detect Output | — | Yes (linear freefall interrupt) |
| g-Select Input | — | Yes (logic high = ±6g, logic low = ±1.5g) |