MP2736DQG-LF-Z vs MP2736DQG-LF-P Vergleich
Detaillierter Direktvergleich von MP2736DQG-LF-Z von Monolithic Power Systems und MP2736DQG-LF-P von Monolithic Power Systems. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Monolithic Power Systems
MP2736DQG-LF-Z - 0.45 Ohm Dual SPDT Analog Switch | MPS
MP2736DQG-LF-Z ✓ AktivMonolithic Power Systems
MP2736DQG-LF-P - 450mΩ Dual SPDT Analog Switch | MPS
MP2736DQG-LF-P ✓ AktivSpezifikationsvergleich
| Parameter | MP2736DQG-LF-Z | MP2736DQG-LF-P |
|---|---|---|
| Marke | Monolithic Power Systems | Monolithic Power Systems |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Dual SPDT monolithic CMOS analog switch | — |
| Number of Circuits | 2 circuits | — |
| Switch Configuration | 2:1 SPDT | 2:1 |
| On-Resistance | 450 mOhm | 450 mΩ |
| Betriebsversorgungsspannung | 1.65 V to 5.5 V | — |
| Supply Type | Single supply | — |
| Enable Control | EN pin; switches are high impedance when EN is high | EN pin; all switches are at high impedance when EN is high |
| Technology | Monolithic CMOS | Monolithic CMOS |
| Gehäuse | 10-QFN (1.4 mm x 1.8 mm) | 10-QFN (1.4 mm × 1.8 mm) |
| Montageart | Surface mount | Surface Mount |
| Signal Type | Analog | — |
| Polarity | Single SPDT per channel | — |
| Application Category | Portable and battery-power applications | — |
| Manufacturer | Monolithic Power Systems | — |
| Manufacturer Product Family | MP2735/MP2736 | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Channel On-Resistance Matching | [DATA_NEEDED: channel on-resistance matching] | — |
| Off-Isolation | [DATA_NEEDED: off-isolation] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | — |
| Switching Time | [DATA_NEEDED: switching time] | 35 ns / 36 ns |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Switch Type | — | Dual single-pole double-throw (Dual SPDT) |
| Number of Switch Circuits | — | 2 circuits |
| Supply Voltage Range | — | 1.65 V to 5.5 V |
| Bandwidth | — | 50 MHz |
| Capacitance | — | 130 pF |
| Signal Direction | — | Bidirectional |
| Switching Behavior | — | Glitch-free |
| Application Class | — | Portable and battery-powered applications |