MPX10DP vs MPXV10GC7U Vergleich
Detaillierter Direktvergleich von MPX10DP von STMicroelectronics und MPXV10GC7U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ Aktiv
Spezifikationsvergleich
| Parameter | MPX10DP | MPXV10GC7U |
|---|---|---|
| Marke | STMicroelectronics | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,09 | $6,10 |
| Pressure Type | Differential | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Ausgangstyp | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone Bridge (uncompensated mV) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| Gehäuse / Bauform | 4-SIP Module | — |
| Montageart | Through-Hole | Through-Hole |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Media Compatibility | Dry gases (non-corrosive) | Dry non-corrosive gases (reference port vented to ambient) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Sensitivity | — | 3.5 mV/kPa nominal |
| Versorgungsspannung | — | 3 V to 6 V (3 V typical excitation) |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Gehäuse | — | 8-DIP (0.550", 13.97 mm) through-hole |
| Compensation | — | None on chip - external calibration required |