MPX10DP vs MPXV10GC7U Comparison
Detailed side-by-side comparison of MPX10DP by STMicroelectronics and MPXV10GC7U by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ Active
Specification Comparison
| Parameter | MPX10DP | MPXV10GC7U |
|---|---|---|
| Brand | STMicroelectronics | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $6.09 | $6.10 |
| Pressure Type | Differential | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Output Type | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone Bridge (uncompensated mV) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| Package / Case | 4-SIP Module | — |
| Mounting Type | Through-Hole | Through-Hole |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Media Compatibility | Dry gases (non-corrosive) | Dry non-corrosive gases (reference port vented to ambient) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Sensitivity | — | 3.5 mV/kPa nominal |
| Supply Voltage | — | 3 V to 6 V (3 V typical excitation) |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Package | — | 8-DIP (0.550", 13.97 mm) through-hole |
| Compensation | — | None on chip - external calibration required |