MPX2010D vs MPXV2010DP Vergleich

Detaillierter Direktvergleich von MPX2010D von STMicroelectronics und MPXV2010DP von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Spezifikationsvergleich

Parameter MPX2010D MPXV2010DP
Marke STMicroelectronics STMicroelectronics
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $9,10 $6,05
Pressure Type Differential (Port 1 vs Port 2) Differential
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] —
Ausgangstyp Analog Wheatstone Bridge (mV) Analog, Ratiometric
Output Voltage Span 0 mV to 25 mV at 10V excitation —
Sensitivity 2.5 mV/kPa (nominal, at 10V excitation) —
Excitation Voltage 10 V (typical), 16 V (maximum) —
Linearity 0.1% of full-scale (typical) —
Betriebstemperaturbereich 0 C to +85 C —
Storage Temperature Range [DATA_NEEDED: storage temperature range] —
Gehäuse / Bauform 4-SIP Module (Case 344-15) —
Montageart Through-Hole Surface Mount
Anzahl der Pins 4 —
On-Chip Temperature Compensation Yes (laser trimmed) —
Bridge Configuration 4-arm piezoresistive Wheatstone —
RoHS-Status [DATA_NEEDED: RoHS status from ST datasheet] Compliant
Sensor Family MPX2010 / MPXV2010G / MPXM2010 —
Diaphragm Type Single monolithic silicon —
Product Type — Pressure Sensor (Piezoresistive, Differential)
Ausgangsspannungsbereich — 0 mV to 25 mV
Versorgungsspannung — 10 V nominal
Port Style — Dual Ports, Same Side (3.3 mm Tube Male)
Gehäuse — 8-BSOP (0.475", 12.06 mm Width), Surface Mount
Betriebstemperatur — 0 C to 85 C
Calibration — On-Chip, Laser-Trimmed
Temperature Compensation — On-Chip, 0 C to 85 C
Output Impedance — [DATA_NEEDED: typical output impedance per side, ohms]
Hysteresis & Linearity — [DATA_NEEDED: %FSS linearity and %FSS hysteresis]
Response Time / Bandwidth — [DATA_NEEDED: response time or bandwidth]
MSL-Level — [DATA_NEEDED: moisture sensitivity level]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern