MPX2010D vs MPXV2010DP Comparação

Comparação detalhada lado a lado de MPX2010D por STMicroelectronics e MPXV2010DP por STMicroelectronics. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.

Comparação de especificações

Parâmetro MPX2010D MPXV2010DP
Marca STMicroelectronics STMicroelectronics
Categoria Pressure Sensors Pressure Sensors
Status do ciclo de vida Ativo Ativo
Status do estoque In Stock In Stock
Preço unitário (USD) $9,10 $6,05
Pressure Type Differential (Port 1 vs Port 2) Differential
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] —
Tipo de saída Analog Wheatstone Bridge (mV) Analog, Ratiometric
Output Voltage Span 0 mV to 25 mV at 10V excitation —
Sensitivity 2.5 mV/kPa (nominal, at 10V excitation) —
Excitation Voltage 10 V (typical), 16 V (maximum) —
Linearity 0.1% of full-scale (typical) —
Faixa de temperatura de operação 0 C to +85 C —
Storage Temperature Range [DATA_NEEDED: storage temperature range] —
Encapsulamento / Caixa 4-SIP Module (Case 344-15) —
Tipo de montagem Through-Hole Surface Mount
Número de pinos 4 —
On-Chip Temperature Compensation Yes (laser trimmed) —
Bridge Configuration 4-arm piezoresistive Wheatstone —
Status RoHS [DATA_NEEDED: RoHS status from ST datasheet] Compliant
Sensor Family MPX2010 / MPXV2010G / MPXM2010 —
Diaphragm Type Single monolithic silicon —
Product Type — Pressure Sensor (Piezoresistive, Differential)
Faixa de tensão de saída — 0 mV to 25 mV
Tensão de alimentação — 10 V nominal
Port Style — Dual Ports, Same Side (3.3 mm Tube Male)
Encapsulamento — 8-BSOP (0.475", 12.06 mm Width), Surface Mount
Temperatura de operação — 0 C to 85 C
Calibration — On-Chip, Laser-Trimmed
Temperature Compensation — On-Chip, 0 C to 85 C
Output Impedance — [DATA_NEEDED: typical output impedance per side, ohms]
Hysteresis & Linearity — [DATA_NEEDED: %FSS linearity and %FSS hysteresis]
Response Time / Bandwidth — [DATA_NEEDED: response time or bandwidth]
Nível MSL — [DATA_NEEDED: moisture sensitivity level]

Fichas técnicas e recursos

Ver todos os produtos Criar BOM Solicitar cotação