MPX2102A vs MPX2102ASX Vergleich

Detaillierter Direktvergleich von MPX2102A von NXP Semiconductors und MPX2102ASX von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Spezifikationsvergleich

Parameter MPX2102A MPX2102ASX
Marke NXP Semiconductors STMicroelectronics
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Obsolete Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $10,95 $10,95
Pressure Type Absolute Absolute
Operating Pressure Range 20 kPa to 100 kPa 0 to 100 kPa (0 to 14.5 PSI absolute)
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] —
Ausgangstyp Analog voltage (Wheatstone bridge, differential) Analog differential Wheatstone bridge
Output Span 0 mV to 40 mV at 10 V supply —
Supply Voltage (Excitation) 10 V typical —
Pressure Linearity [DATA_NEEDED: % of full scale - verify in datasheet] —
Betriebstemperaturbereich -40C to +125C —
Gehäuse / Bauform 4-SIP Module (Case 344-15), through-hole —
Montageart Through-Hole (SIP) Through-hole
Port Style Barbed pressure port (axial) —
Technology Silicon piezoresistive (MEMS) with on-chip thin-film compensation —
Temperature Compensation On-chip (laser trimmed) -40C to +125C —
Bridge Resistance [DATA_NEEDED: input/output bridge resistance] —
Response Time [DATA_NEEDED: response time in ms] —
RoHS-Status Compliant (per NXP product page) Compliant
MSL-Level Not applicable (through-hole, no moisture sensitivity rating) —
Sensortyp — Piezoresistive Absolute Pressure Sensor
Port Type — Male, 0.19 inch (4.93 mm) tube, side-port
Output Voltage Span — 0 mV to 40 mV at 10 V excitation
Offset — 0 mV to 1.0 mV
Versorgungsspannung — 10 V DC typical (maximum 16 V DC)
Versorgungsstrom — 6 mA typical at 10 V
Full-Scale Span (FS) — 40 mV nominal
Betriebstemperatur — -40C to +125C
Compensated Temperature Range — 0C to +85C
Gehäuse — 4-SIP Module (case 344-15)
Termination Style — PCB through-hole pins (4 leads)
Linearity — [DATA_NEEDED: typical linearity %FS]
Sensitivity — 0.4 mV/kPa nominal at 10 V
Feuchtigkeitsempfindlichkeitsgrad (MSL) — [DATA_NEEDED: MSL rating]
Lead-Free — Yes

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern