MPX2102A vs MPX2102ASX Comparaison
Comparaison détaillée côte à côte de MPX2102A par NXP Semiconductors et MPX2102ASX par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX2102A - 100 kPa Absolute Pressure Sensor | NXP Semiconductors
MPX2102A ObsoleteSTMicroelectronics
MPX2102ASX - 100kPa Absolute Pressure Sensor | STMicroelectronics
MPX2102ASX ✓ ActifComparaison des spécifications
| Paramètre | MPX2102A | MPX2102ASX |
|---|---|---|
| Marque | NXP Semiconductors | STMicroelectronics |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Obsolete | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,95 | $10,95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 20 kPa to 100 kPa | 0 to 100 kPa (0 to 14.5 PSI absolute) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Type de sortie | Analog voltage (Wheatstone bridge, differential) | Analog differential Wheatstone bridge |
| Output Span | 0 mV to 40 mV at 10 V supply | — |
| Supply Voltage (Excitation) | 10 V typical | — |
| Pressure Linearity | [DATA_NEEDED: % of full scale - verify in datasheet] | — |
| Plage de température de fonctionnement | -40C to +125C | — |
| Boîtier / Format | 4-SIP Module (Case 344-15), through-hole | — |
| Type de montage | Through-Hole (SIP) | Through-hole |
| Port Style | Barbed pressure port (axial) | — |
| Technology | Silicon piezoresistive (MEMS) with on-chip thin-film compensation | — |
| Temperature Compensation | On-chip (laser trimmed) -40C to +125C | — |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Response Time | [DATA_NEEDED: response time in ms] | — |
| Statut RoHS | Compliant (per NXP product page) | Compliant |
| Niveau MSL | Not applicable (through-hole, no moisture sensitivity rating) | — |
| Type de capteur | — | Piezoresistive Absolute Pressure Sensor |
| Port Type | — | Male, 0.19 inch (4.93 mm) tube, side-port |
| Output Voltage Span | — | 0 mV to 40 mV at 10 V excitation |
| Offset | — | 0 mV to 1.0 mV |
| Tension d'alimentation | — | 10 V DC typical (maximum 16 V DC) |
| Courant d'alimentation | — | 6 mA typical at 10 V |
| Full-Scale Span (FS) | — | 40 mV nominal |
| Température de fonctionnement | — | -40C to +125C |
| Compensated Temperature Range | — | 0C to +85C |
| Boîtier | — | 4-SIP Module (case 344-15) |
| Termination Style | — | PCB through-hole pins (4 leads) |
| Linearity | — | [DATA_NEEDED: typical linearity %FS] |
| Sensitivity | — | 0.4 mV/kPa nominal at 10 V |
| Niveau de sensibilité à l'humidité (MSL) | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |