MPXH6115A6U vs MP3H6115A6U Vergleich
Detaillierter Direktvergleich von MPXH6115A6U von NXP Semiconductors und MP3H6115A6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP
MPXH6115A6U ✓ AktivSpezifikationsvergleich
| Parameter | MPXH6115A6U | MP3H6115A6U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,95 | $4,85 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Maximum Over-Pressure | 400 kPa | — |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Accuracy (0C to 85C) | 1.5 % (max) | — |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.12 V to 2.8 V |
| Versorgungsspannung | 4.75 V to 5.25 V | 3 V |
| Versorgungsstrom | 6 mA (typical) | — |
| Betriebstemperatur | -40C to +125C | -40 C to +125 C |
| Compensated Temperature | 0C to +85C | — |
| Ausgangstyp | Analog, ratiometric to VCC | Analog, ratiometric |
| Gehäuse | 8-SOIC (0.295", 7.50 mm width) with top-side pressure port | 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width |
| Montageart | Surface Mount | Surface Mount |
| Pressure Port | Vertical/Horizontal axial port (case variant 6) | Male - 0.13 inch (3.3 mm) tube |
| RoHS-Status | [DATA_NEEDED: RoHS compliance] | Compliant |
| Media Compatibility | Dry air, non-corrosive gases only | — |
| Sensortyp | — | Absolute pressure sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure | — | 15 kPa ~ 115 kPa |
| Accuracy | — | High accuracy at high temperature (per datasheet) |
| Temperature Compensation | — | -40 C to +125 C |
| Technology | — | Piezoresistive (MEMS) with bipolar signal conditioning |
| Signal Conditioning | — | On-chip bipolar op-amp and thin-film resistor network |
| Output Ratiometric | — | Yes (output proportional to VDD) |
| Package Material | — | Durable thermoplastic (PPS) surface-mount package |