MPXH6115A6U vs MP3H6115A6U Comparaison
Comparaison détaillée côte à côte de MPXH6115A6U par NXP Semiconductors et MP3H6115A6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP
MPXH6115A6U ✓ ActifComparaison des spécifications
| Paramètre | MPXH6115A6U | MP3H6115A6U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,95 | $4,85 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Maximum Over-Pressure | 400 kPa | — |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Accuracy (0C to 85C) | 1.5 % (max) | — |
| Plage de tension de sortie | 0.2 V to 4.7 V | 0.12 V to 2.8 V |
| Tension d'alimentation | 4.75 V to 5.25 V | 3 V |
| Courant d'alimentation | 6 mA (typical) | — |
| Température de fonctionnement | -40C to +125C | -40 C to +125 C |
| Compensated Temperature | 0C to +85C | — |
| Type de sortie | Analog, ratiometric to VCC | Analog, ratiometric |
| Boîtier | 8-SOIC (0.295", 7.50 mm width) with top-side pressure port | 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width |
| Type de montage | Surface Mount | Surface Mount |
| Pressure Port | Vertical/Horizontal axial port (case variant 6) | Male - 0.13 inch (3.3 mm) tube |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | Compliant |
| Media Compatibility | Dry air, non-corrosive gases only | — |
| Type de capteur | — | Absolute pressure sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure | — | 15 kPa ~ 115 kPa |
| Accuracy | — | High accuracy at high temperature (per datasheet) |
| Temperature Compensation | — | -40 C to +125 C |
| Technology | — | Piezoresistive (MEMS) with bipolar signal conditioning |
| Signal Conditioning | — | On-chip bipolar op-amp and thin-film resistor network |
| Output Ratiometric | — | Yes (output proportional to VDD) |
| Package Material | — | Durable thermoplastic (PPS) surface-mount package |