MPXH6250A6T1 vs MPXH6300A6U Vergleich
Detaillierter Direktvergleich von MPXH6250A6T1 von NXP Semiconductors und MPXH6300A6U von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPXH6250A6T1 - 20-250kPa Absolute Pressure Sensor | NXP/STMicro
MPXH6250A6T1 ✓ AktivSTMicroelectronics
MPXH6300A6U - 20-304kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6300A6U ✓ AktivSpezifikationsvergleich
| Parameter | MPXH6250A6T1 | MPXH6300A6U |
|---|---|---|
| Marke | NXP Semiconductors | STMicroelectronics |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,55 | $8,10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 20 kPa to 250 kPa (2.9 PSI to 36.26 PSI) | 20 kPa to 304 kPa (2.9 PSI to 44.09 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Ausgangstyp | Analog, ratiometric | Analog voltage, ratiometric to Vcc |
| Ausgangsspannungsbereich | 0.3 V to 4.9 V | 0.3 V to 4.9 V |
| Full-Scale Span (typical) | 4.6 V | — |
| Versorgungsspannung | 4.74 V to 5.46 V (5 V typical) | 4.74 V to 5.46 V (5.0 V nominal) |
| Supply Current (typical) | 5 mA | — |
| Accuracy | 1.5 % over 0 C to 85 C (datasheet typical) | +/-1.5% VFSS (typical, over compensated range) |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Port Style | Axial port (T1 suffix) | — |
| Gehäuse | 8-SOIC (0.295 inch / 7.50 mm width) | 8-SOIC (0.295 inch / 7.50 mm wide body) |
| Montageart | Surface Mount | Surface Mount |
| On-Chip Signal Conditioning | Yes (bipolar op-amp + thin-film trimming network) | — |
| Temperature Compensation | Yes (on-chip, calibrated) | — |
| Media Compatibility | Dry air / non-corrosive gases (T1 variant) | — |
| RoHS-Status | Compliant per NXP product page | Compliant |
| Sensitivity | — | 16.2 mV/kPa (typical) |
| Versorgungsstrom | — | 10 mA (maximum) |
| Betriebstemperatur | — | -40 C to +125 C |
| Compensated Temperature Range | — | 0 C to 85 C |
| Port Configuration | — | Single axial port, top side |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film resistor network |
| Technology | — | Piezoresistive MEMS with integrated ASIC |
| Response Time | — | [DATA_NEEDED: response time] |
| Pressure Hysteresis | — | [DATA_NEEDED: pressure hysteresis value] |