MPXH6250A6T1 vs MPXH6300A6U Comparaison
Comparaison détaillée côte à côte de MPXH6250A6T1 par NXP Semiconductors et MPXH6300A6U par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXH6250A6T1 - 20-250kPa Absolute Pressure Sensor | NXP/STMicro
MPXH6250A6T1 ✓ ActifSTMicroelectronics
MPXH6300A6U - 20-304kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6300A6U ✓ ActifComparaison des spécifications
| Paramètre | MPXH6250A6T1 | MPXH6300A6U |
|---|---|---|
| Marque | NXP Semiconductors | STMicroelectronics |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,55 | $8,10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 20 kPa to 250 kPa (2.9 PSI to 36.26 PSI) | 20 kPa to 304 kPa (2.9 PSI to 44.09 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Type de sortie | Analog, ratiometric | Analog voltage, ratiometric to Vcc |
| Plage de tension de sortie | 0.3 V to 4.9 V | 0.3 V to 4.9 V |
| Full-Scale Span (typical) | 4.6 V | — |
| Tension d'alimentation | 4.74 V to 5.46 V (5 V typical) | 4.74 V to 5.46 V (5.0 V nominal) |
| Supply Current (typical) | 5 mA | — |
| Accuracy | 1.5 % over 0 C to 85 C (datasheet typical) | +/-1.5% VFSS (typical, over compensated range) |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Port Style | Axial port (T1 suffix) | — |
| Boîtier | 8-SOIC (0.295 inch / 7.50 mm width) | 8-SOIC (0.295 inch / 7.50 mm wide body) |
| Type de montage | Surface Mount | Surface Mount |
| On-Chip Signal Conditioning | Yes (bipolar op-amp + thin-film trimming network) | — |
| Temperature Compensation | Yes (on-chip, calibrated) | — |
| Media Compatibility | Dry air / non-corrosive gases (T1 variant) | — |
| Statut RoHS | Compliant per NXP product page | Compliant |
| Sensitivity | — | 16.2 mV/kPa (typical) |
| Courant d'alimentation | — | 10 mA (maximum) |
| Température de fonctionnement | — | -40 C to +125 C |
| Compensated Temperature Range | — | 0 C to 85 C |
| Port Configuration | — | Single axial port, top side |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film resistor network |
| Technology | — | Piezoresistive MEMS with integrated ASIC |
| Response Time | — | [DATA_NEEDED: response time] |
| Pressure Hysteresis | — | [DATA_NEEDED: pressure hysteresis value] |