MPXV10GC7U vs MPX53DP Vergleich

Detaillierter Direktvergleich von MPXV10GC7U von NXP Semiconductors und MPX53DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ Aktiv
NXP Semiconductors
MPX53DP MPX53DP - 50 kPa Uncompensated Differential Pressure Sensor | NXP

MPX53DP - 50 kPa Uncompensated Differential Pressure Sensor | NXP

MPX53DP ⚠ Letzte Bestellmöglichkeit

Spezifikationsvergleich

Parameter MPXV10GC7U MPX53DP
Marke NXP Semiconductors NXP Semiconductors
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Letzte Kaufgelegenheit
Lagerstatus In Stock In Stock
Stückpreis (USD) $6,10 $7,48
Pressure Type Vented Gauge Differential
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) —
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] —
Ausgangstyp Analog Wheatstone Bridge (uncompensated mV) Analog millivolt (ratiometric)
Full-Scale Output 0 mV to 35 mV at 3 V supply —
Sensitivity 3.5 mV/kPa nominal [DATA_NEEDED: sensitivity in mV/kPa]
Versorgungsspannung 3 V to 6 V (3 V typical excitation) 3 V DC (typical)
Versorgungsstrom [DATA_NEEDED: supply current] —
Input Impedance [DATA_NEEDED: bridge input impedance] —
Output Impedance [DATA_NEEDED: bridge output impedance] —
Betriebstemperatur [DATA_NEEDED: operating temperature range] -40C to +125C
Port Style Top port, 0.13" (3.18 mm) tube inlet —
Gehäuse 8-DIP (0.550", 13.97 mm) through-hole 4-SIP Module (Through-Hole, Dual Port)
Montageart Through-Hole Through-Hole
Media Compatibility Dry non-corrosive gases (reference port vented to ambient) Non-corrosive dry gases (per datasheet)
Compensation None on chip - external calibration required —
RoHS-Status [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status]
Sensortyp — Piezoresistive Pressure Sensor, Uncompensated
Pressure Range — 0 kPa to 50 kPa (0 PSI to 7.25 PSI)
Port Configuration — Dual Vertical Port (Differential)
Ausgangsspannung — 0 mV to 60 mV at 3 V
Linearity — 0.4% typical
Port Size — 0.19 inch (4.93 mm) Tube
MSL-Level — [DATA_NEEDED: MSL level]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern