MPXV10GC7U vs MPX53DP Comparaison
Comparaison détaillée côte à côte de MPXV10GC7U par NXP Semiconductors et MPX53DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX53DP - 50 kPa Uncompensated Differential Pressure Sensor | NXP
MPX53DP ⚠ Dernier achatComparaison des spécifications
| Paramètre | MPXV10GC7U | MPX53DP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Dernier achat |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $6,10 | $7,48 |
| Pressure Type | Vented Gauge | Differential |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | — |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Type de sortie | Analog Wheatstone Bridge (uncompensated mV) | Analog millivolt (ratiometric) |
| Full-Scale Output | 0 mV to 35 mV at 3 V supply | — |
| Sensitivity | 3.5 mV/kPa nominal | [DATA_NEEDED: sensitivity in mV/kPa] |
| Tension d'alimentation | 3 V to 6 V (3 V typical excitation) | 3 V DC (typical) |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Input Impedance | [DATA_NEEDED: bridge input impedance] | — |
| Output Impedance | [DATA_NEEDED: bridge output impedance] | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Port Style | Top port, 0.13" (3.18 mm) tube inlet | — |
| Boîtier | 8-DIP (0.550", 13.97 mm) through-hole | 4-SIP Module (Through-Hole, Dual Port) |
| Type de montage | Through-Hole | Through-Hole |
| Media Compatibility | Dry non-corrosive gases (reference port vented to ambient) | Non-corrosive dry gases (per datasheet) |
| Compensation | None on chip - external calibration required | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| Type de capteur | — | Piezoresistive Pressure Sensor, Uncompensated |
| Pressure Range | — | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) |
| Port Configuration | — | Dual Vertical Port (Differential) |
| Tension de sortie | — | 0 mV to 60 mV at 3 V |
| Linearity | — | 0.4% typical |
| Port Size | — | 0.19 inch (4.93 mm) Tube |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |