MPXV2053GP vs MPX2053GP Vergleich
Detaillierter Direktvergleich von MPXV2053GP von NXP Semiconductors und MPX2053GP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPXV2053GP | MPX2053GP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,50 | $9,75 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) |
| Maximum Overpressure | [DATA_NEEDED: max overpressure rating] | — |
| Ausgangstyp | Analog, Wheatstone bridge (mV differential) | Wheatstone Bridge (analog voltage, ratiometric) |
| Output Span | 0 mV to 40 mV (typ) at 10 V supply | — |
| Versorgungsspannung | 10 V typical (ratiometric output) | 10 V typical (16 V maximum) |
| Port Style | Top-side, male tube 0.13" (3.17 mm) | — |
| Gehäuse / Bauform | 8-SMD, Gull Wing, Side Port | — |
| Montageart | Surface Mount | Through-Hole |
| Betriebstemperatur | [DATA_NEEDED: full operating temperature range, spec from datasheet 0C to +85C typical] | 0°C to +85°C |
| Temperature Compensation | On-chip, calibrated | On-chip, calibrated |
| Technology | Silicon piezoresistive (MEMS strain gauge) | Silicon piezoresistive (MEMS) |
| Linearity | [DATA_NEEDED: linearity %FS] | [DATA_NEEDED: linearity %FS] |
| Hysteresis | [DATA_NEEDED: hysteresis %FS] | — |
| Media Compatibility | Dry non-corrosive gases | — |
| RoHS-Status | [DATA_NEEDED: confirm RoHS status from datasheet] | Compliant |
| Sensitivity | — | 0.8 mV/kPa typical |
| Full-Scale Output | — | 0 mV to 40 mV (at 10 V supply) |
| Port Configuration | — | Single radial barbed port, 0.19" (4.93 mm) tube |
| Gehäuse | — | 4-SIP Module (Unibody-4) |
| Termination Style | — | PC Pin (through-hole) |