MPXV5100GC7U vs MPX5100DP Vergleich

Detaillierter Direktvergleich von MPXV5100GC7U von STMicroelectronics und MPX5100DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Spezifikationsvergleich

Parameter MPXV5100GC7U MPX5100DP
Marke STMicroelectronics NXP Semiconductors
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $8,95 $12,03
Pressure Type Vented Gauge Differential
Operating Pressure Range 0 to 100 kPa (0 to 14.5 PSI) 0 kPa to 100 kPa (0 to 14.5 PSI)
Maximum Overload Pressure 400 kPa [DATA_NEEDED: maximum overload pressure]
Versorgungsspannung 4.75 V to 5.25 V (typical 5 V) —
Ausgangsspannungsbereich 0.2 V to 4.7 V 0.2 V to 4.7 V (ratiometric, ~4.5 V span)
Sensitivity 45 mV/kPa 45 mV/kPa nominal
Accuracy 1.5 % over 0 °C to 85 °C ±2.5% (0 to 85 °C)
Response Time 1.0 ms —
Versorgungsstrom [DATA_NEEDED: full-load supply current] —
Betriebstemperatur -40 °C to +125 °C -40 °C to +125 °C
Storage Temperature [DATA_NEEDED: storage temperature range] —
Gehäuse 8-DIP (0.550" / 13.97 mm), Top Port 6-SIP Module (through-hole)
Port Type Male 0.13" (3.17 mm) tube, vertical —
Montageart Through-hole (DIP) Through-Hole (SIP)
RoHS-Status Compliant [DATA_NEEDED: RoHS compliance status]
Ausgangstyp Analog ratiometric, single-ended Analog, ratiometric to Vcc
Supply Voltage (Vcc) — 5 V (nominal)
Response Bandwidth — 1 kHz (typical)
Port Configuration — Dual ports, male 0.19" (4.93 mm) tube, same side
Signal Conditioning — On-chip amplifier, temperature compensation, calibration
Technology — Piezoresistive MEMS with bipolar ASIC
Lead-Free — [DATA_NEEDED: lead-free status]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern