MSP430F149IPM vs MSP430F133IPM Vergleich

Detaillierter Direktvergleich von MSP430F149IPM von Texas Instruments und MSP430F133IPM von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
MSP430F149IPM MSP430F149IPM - 8MHz 16-bit MCU, 60KB Flash, 64-LQFP | TI

MSP430F149IPM - 8MHz 16-bit MCU, 60KB Flash, 64-LQFP | TI

MSP430F149IPM ✓ Aktiv
Texas Instruments
MSP430F133IPM MSP430F133IPM - 8MHz Mixed-Signal MCU | Texas Instruments

MSP430F133IPM - 8MHz Mixed-Signal MCU | Texas Instruments

MSP430F133IPM ✓ Aktiv

Spezifikationsvergleich

Parameter MSP430F149IPM MSP430F133IPM
Marke Texas Instruments Texas Instruments
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv Aktiv
Core MSP430 CPU16 (16-bit RISC) —
Series MSP430x1xx —
Maximale Taktfrequenz 8 MHz —
Program Memory 60 KB Flash (60K x 8 + 256B info) 8 KB Flash
RAM 2 KB 256 B
Supply Voltage Range 1.8 V to 3.6 V —
Active Mode Current (1 MHz, 2.2 V) 280 µA —
Standby Mode Current 1.6 µA —
Off Mode Current (RAM Retention) 0.1 µA —
Wake-up From Standby <6 µs —
ADC 12-bit SAR, 8 channels, up to 200 ksps —
DAC 2x 12-bit DAC —
Comparators 2 on-chip —
Communication Interfaces 2x USART (UART/SPI), 1x I2C/SPI, 1x UART —
Timers 16-bit Timer A and Timer B, WDT+, basic timer1 —
Hardware Multiplier Yes (16x16, signed/unsigned) —
Betriebstemperatur -40C to +85C (IPM suffix) -40 °C to +85 °C
Gehäuse 64-LQFP (PM), 10x10 mm 64-pin LQFP (PM)
Montageart Surface Mount Surface Mount
RoHS-Status Compliant [DATA_NEEDED: RoHS status]
CPU Speed — 8 MHz
Architecture — 16-bit RISC
ADC Resolution — 12 bit
Comparator — 1 comparator
Serial Interfaces — SPI and UART
USART Count — 1 USART
Package Family — LQFP
Versorgungsspannung — [DATA_NEEDED: supply voltage range]
ADC Input Configuration — [DATA_NEEDED: ADC input channel count and configuration]
Digital I/O Count — [DATA_NEEDED: digital I/O count]
GPIO Port Count — [DATA_NEEDED: GPIO port count]
Timer Configuration — [DATA_NEEDED: timer and capture/compare resources]
Operating Mode — [DATA_NEEDED: low-power operating modes]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern