MSP430F149IPM vs MSP430F133IPM Karşılaştırma

Ayrıntılı yan yana karşılaştırma MSP430F149IPM tarafından Texas Instruments ve MSP430F133IPM tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
MSP430F149IPM MSP430F149IPM - 8MHz 16-bit MCU, 60KB Flash, 64-LQFP | TI

MSP430F149IPM - 8MHz 16-bit MCU, 60KB Flash, 64-LQFP | TI

MSP430F149IPM ✓ Aktif
Texas Instruments
MSP430F133IPM MSP430F133IPM - 8MHz Mixed-Signal MCU | Texas Instruments

MSP430F133IPM - 8MHz Mixed-Signal MCU | Texas Instruments

MSP430F133IPM ✓ Aktif

Özellik Karşılaştırması

Parametre MSP430F149IPM MSP430F133IPM
Marka Texas Instruments Texas Instruments
Kategori Microcontrollers Microcontrollers
Yaşam Döngüsü Durumu Aktif Aktif
Core MSP430 CPU16 (16-bit RISC) —
Series MSP430x1xx —
Azami Saat Hızı 8 MHz —
Program Memory 60 KB Flash (60K x 8 + 256B info) 8 KB Flash
RAM 2 KB 256 B
Supply Voltage Range 1.8 V to 3.6 V —
Active Mode Current (1 MHz, 2.2 V) 280 µA —
Standby Mode Current 1.6 µA —
Off Mode Current (RAM Retention) 0.1 µA —
Wake-up From Standby <6 µs —
ADC 12-bit SAR, 8 channels, up to 200 ksps —
DAC 2x 12-bit DAC —
Comparators 2 on-chip —
Communication Interfaces 2x USART (UART/SPI), 1x I2C/SPI, 1x UART —
Timers 16-bit Timer A and Timer B, WDT+, basic timer1 —
Hardware Multiplier Yes (16x16, signed/unsigned) —
İşletim Sıcaklığı -40C to +85C (IPM suffix) -40 °C to +85 °C
Paket 64-LQFP (PM), 10x10 mm 64-pin LQFP (PM)
Montaj Türü Surface Mount Surface Mount
RoHS Durumu Compliant [DATA_NEEDED: RoHS status]
CPU Speed — 8 MHz
Architecture — 16-bit RISC
ADC Resolution — 12 bit
Comparator — 1 comparator
Serial Interfaces — SPI and UART
USART Count — 1 USART
Package Family — LQFP
Besleme Gerilimi — [DATA_NEEDED: supply voltage range]
ADC Input Configuration — [DATA_NEEDED: ADC input channel count and configuration]
Digital I/O Count — [DATA_NEEDED: digital I/O count]
GPIO Port Count — [DATA_NEEDED: GPIO port count]
Timer Configuration — [DATA_NEEDED: timer and capture/compare resources]
Operating Mode — [DATA_NEEDED: low-power operating modes]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin