MW7IC2040NR1 vs MW7IC2040GNR1 Vergleich
Detaillierter Direktvergleich von MW7IC2040NR1 von NXP Semiconductors und MW7IC2040GNR1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MW7IC2040NR1 | MW7IC2040GNR1 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | RF Amplifiers | RF Amplifiers |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $24,20 | $17,50 |
| Manufacturer | NXP Semiconductors (formerly Freescale / Motorola Semiconductor) | NXP Semiconductors (formerly Freescale/Motorola) |
| Technology | RF LDMOS (Laterally Diffused MOSFET) | LDMOS (Laterally Diffused MOS) |
| RF Type | General Purpose / Wideband Integrated Power Amplifier | General Purpose / Cellular Base Station PA |
| Funktion | Two-stage integrated power amplifier with on-chip matching | — |
| Frequency Range (Application) | 1805 MHz to 1990 MHz (covers 1805-1880 MHz DCS/PCS and 1930-1990 MHz UMTS) | — |
| Frequency Range (Characterization) | 100 MHz to 1 GHz | — |
| Supply Voltage (Vdd) | 24 V to 32 V (nominal 28 V) | — |
| Maximum Supply Voltage | 32 V | — |
| Quiescent Supply Current (Idq) | 75 mA | — |
| Small-Signal Gain | 23.5 dB | 23.5 dB (typical at 1.99 GHz, per web data) |
| Output Power (avg, W-CDMA) | 4 W (typical at rated operating conditions) | — |
| Modulation Compatibility | Single W-CDMA, GSM/EDGE, UMTS, LTE, all typical cellular BTS formats | — |
| Gehäuse / Bauform | TO-270 WBL-16 (TO-270-16 Variant, Flat Leads), plastic over-mold surface-mount | TO-270-16 Variant, Gull Wing (TO-270 WBL-16) |
| Pin-Anzahl | 16 | — |
| Operating Mode | Class-AB (multi-stage, externally biased) | — |
| Lead Configuration | Flat leads (surface-mount) | — |
| Montageart | Surface Mount (PCB solderable with bottom drain ground plane) | Surface Mount (Gull Wing leads) |
| Betriebstemperatur | -40 C to +85 C (industrial base-station operating ambient; per Freescale/NXP LDMOS module family) | — |
| Packaging Type | Tape & Reel (per part suffix NR1 suffix convention) | — |
| RoHS-Status | Compliant (per NXP product family) | [DATA_NEEDED: RoHS status] |
| Part Family | — | MW7IC2040 (NR1 / GNR1 / NBR1) |
| Device Type | — | RF LDMOS Wideband Integrated Power Amplifier |
| Frequency Range | — | 1805 MHz to 1990 MHz |
| Output Power (CW) | — | 4 W typical |
| Power Supply Voltage | — | 24 V to 32 V (28 V nominal) |
| Ruhestrom | — | 75 mA (typical, per web data) |
| Modulation Support | — | W-CDMA, GSM/EDGE, multi-carrier cellular |
| On-Chip Matching | — | Yes (input/output 50 ohm) |
| Number of Stages | — | 2 (multi-stage integrated) |
| Package Body Material | — | Plastic / Epoxy overmold |
| Packaging | — | Tape & Reel |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| ESD Protection | — | Yes (integrated) |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |
| Halogenfrei | — | Not Compliant (per GlobalSpec listing) |