MX30UF4G18AB vs MX30UF4G16AB Vergleich
Detaillierter Direktvergleich von MX30UF4G18AB von Macronix und MX30UF4G16AB von Macronix. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MX30UF4G18AB | MX30UF4G16AB |
|---|---|---|
| Marke | Macronix | Macronix |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,80 | $2,55 |
| Speichertyp | Non-volatile NAND Flash (SLC) | Non-volatile NAND Flash (SLC) |
| Density | 4 Gbit (512 MiB x8) | 4 Gbit (512 MB) |
| Cell Technology | Single-Level Cell (SLC), 1 bit/cell | — |
| Supply Voltage (VCC) | 1.7 V to 1.95 V (1.8 V typ) | 1.7 V to 1.95 V (1.8 V typical) |
| Schnittstelle | 8-bit parallel asynchronous | Parallel / Asynchronous NAND (ONFI 1.0) |
| Page Size | 2,112 bytes (2,048 + 64 spare) or 4,320 bytes ONFI mode | [DATA_NEEDED: page size bytes] |
| Block Size | 128 KiB (64 pages x 2 KiB) [DATA_NEEDED: exact blocks-per-die count] | [DATA_NEEDED: block size / block erase granularity] |
| Page Read Time (tR) | 25 ns (async, typical) [DATA_NEEDED: confirmed from datasheet v1.2 timing table] | — |
| Standby Current (Sleep Mode) | 50 uA max | 50 uA (maximum) |
| ONFI Compliance | ONFI 1.0 | ONFI 1.0 parameter page |
| Endurance (P/E cycles) | [DATA_NEEDED: typical endurance spec] | — |
| Data Retention | [DATA_NEEDED: typical retention spec] | [DATA_NEEDED: typical data retention years] |
| Betriebstemperatur | -40 C to +85 C (industrial) | — |
| Gehäuse | 48-pin TSOP I (12 mm x 20 mm x 1.0 mm) for -TI; 63-VFBGA (9x11) for -XKI | 63-ball VFBGA, 9 mm x 11 mm |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 [DATA_NEEDED: confirm from datasheet] | — |
| RoHS-Status | Compliant | Compliant |
| Lead-free | Yes | — |
| Speicherorganisation | — | 256 M x 16 |
| Bus Width | — | x16 (also supports x8) |
| Access Time (tRC) | — | 25 ns (typical) |
| Endurance (P/E Cycles) | — | [DATA_NEEDED: typical P/E cycles] |
| Betriebstemperaturbereich | — | -40C to +85C (industrial) |
| Lead-Free | — | Yes |
| Bad Block Management | — | External (host-managed) |
| ECC Support | — | External hardware ECC required |