MX574ALEWI+TCDR vs MC145572PBR2 Vergleich
Detaillierter Direktvergleich von MX574ALEWI+TCDR von Analog Devices und MC145572PBR2 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MX574ALEWI+TCDR - 12-Bit 25µs SAR ADC, 28-SOIC | Maxim Integrated
MX574ALEWI+TCDR ✓ AktivNXP Semiconductors
MC145572PBR2 - ISDN U-Interface Transceiver | NXP | 44-LQFP
MC145572PBR2 ObsoleteSpezifikationsvergleich
| Parameter | MX574ALEWI+TCDR | MC145572PBR2 |
|---|---|---|
| Marke | Analog Devices | NXP Semiconductors |
| Kategorie | ADC/DAC | Interface ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $17,10 | $5,20 |
| Manufacturer | Analog Devices Inc. (formerly Maxim Integrated) | NXP Semiconductors (formerly Freescale / Motorola) |
| MPN | MX574ALEWI+TCDR | — |
| Converter Type | SAR (Successive Approximation Register) ADC | — |
| Auflösung | 12 bit | — |
| Number of Inputs | 1 | — |
| Input Type | Single-Ended (unipolar or bipolar ranges via pin strapping) | — |
| Maximum Conversion Time | 25 µs | — |
| Sample Rate (max) | 40 kSPS (typ) | — |
| Analog Input Ranges | 0 to +5 V, 0 to +10 V, ±5 V, ±10 V (software/strap-selectable) | — |
| Internal Reference | +10 V buried Zener, ±0.25 % initial accuracy (typ) | — |
| Data Interface | 12-bit parallel, 8-bit parallel, or serial | — |
| Ausgangstyp | Three-state (high-Z) CMOS-compatible | — |
| Integral Nonlinearity (A grade) | ±1 LSB (max) | — |
| Supply Voltages | V+ = +12 V or +15 V, V- = -12 V or -15 V, VCC (digital) = +5 V | — |
| Power Consumption | 150 mW (typ, ±15 V supply) | — |
| Betriebstemperatur | 0 °C to +70 °C (commercial, 'L' grade) | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 28-pin SOIC wide-body (SOIC-28W) | 44-LQFP (10x10 mm) |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | RoHS non-compliant (SnPb finish, per legacy Freescale data) |
| AEC-Q100 | Not qualified (commercial grade) | — |
| Part Type | — | ISDN U-Interface Transceiver |
| Versorgungsspannung | — | 5 V (typical) |
| Datenrate | — | 160 kbps (2B1Q full-duplex over single twisted pair) |
| Line Code | — | 2B1Q (ANSI T1.601-1992) |
| Interface Standard | — | ANSI T1.601-1992 / ETSI ETR 080 |
| Operating Modes | — | NT (Network Termination) and LT (Line Termination), strap-selectable |
| HDLC Controller | — | On-chip, up to 4x 16-bit or 2x 32-bit identifiers |
| Echo Canceller | — | Integrated adaptive |
| Scrambler/Descrambler | — | On-chip |
| Host Interface | — | Parallel microprocessor-compatible |
| Lead-Free Status | — | Contains lead (legacy PBR2 tape-and-reel part marking) |
| Series | — | MC145572 |
| Part Status | — | Obsolete / Last-time-buy stock only |