NE5532ADRG4 vs NE5532DR Vergleich
Detaillierter Direktvergleich von NE5532ADRG4 von Texas Instruments und NE5532DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments
NE5532ADRG4 ✓ AktivSpezifikationsvergleich
| Parameter | NE5532ADRG4 | NE5532DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | General-purpose operational amplifier | Dual low-noise operational amplifier |
| Number of Circuits | 2 circuits | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Slew Rate | 9 V/µs typical | 10 V/μs typical |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| High DC Voltage Gain | 100 V/mV typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Gehäuse | 8-SOIC (0.154 inch, 3.90 mm width) | 8-pin SOIC |
| Packaging | Tape and reel | — |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C for NE5532x |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Maximaler Ausgangsstrom | [DATA_NEEDED: maximum output current] | — |
| Wärmewiderstand | [DATA_NEEDED: thermal resistance] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Number of Amplifier Circuits | — | 2 circuits |
| DC Voltage Gain | — | 100 V/mV typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |