NE5532ADRG4 vs NE5532DR Comparación
Comparación detallada lado a lado de NE5532ADRG4 por Texas Instruments y NE5532DR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5532ADRG4 - Dual 10 MHz Low-Noise Op Amp | Texas Instruments
NE5532ADRG4 ✓ ActivoTexas Instruments
NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532DR ✓ ActivoComparación de especificaciones
| Parámetro | NE5532ADRG4 | NE5532DR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | General-purpose operational amplifier | Dual low-noise operational amplifier |
| Number of Circuits | 2 circuits | — |
| Gain-Bandwidth Product | 10 MHz typical | — |
| Slew Rate | 9 V/µs typical | 10 V/μs typical |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| High DC Voltage Gain | 100 V/mV typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Encapsulado | 8-SOIC (0.154 inch, 3.90 mm width) | 8-pin SOIC |
| Packaging | Tape and reel | — |
| Tipo de montaje | Surface mount | Surface Mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C for NE5532x |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Corriente de salida máxima | [DATA_NEEDED: maximum output current] | — |
| Resistencia térmica | [DATA_NEEDED: thermal resistance] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Number of Amplifier Circuits | — | 2 circuits |
| DC Voltage Gain | — | 100 V/mV typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Corriente de alimentación | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |