NE5532N vs NE5532AP Vergleich
Detaillierter Direktvergleich von NE5532N von onsemi und NE5532AP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ AktivSpezifikationsvergleich
| Parameter | NE5532N | NE5532AP |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Unknown | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,49 |
| Product Type | Dual internally compensated operational amplifier | — |
| Number of Circuits | 2 | — |
| Amplifier Type | General Purpose | Low-Noise Operational Amplifier |
| Gehäuse | 8-PDIP (0.300 in, 7.62 mm) | — |
| Packaging | Tube | — |
| Gain Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/µs | [DATA_NEEDED: slew rate V/us] |
| Compensation | Internal frequency compensation | — |
| Noise Performance | Low noise | — |
| Output Drive | Improved output-drive capability | 600 ohm loads (typ.) |
| Small-Signal Bandwidth | High small-signal bandwidth | — |
| Power Bandwidth | High power bandwidth | — |
| Montagestil | Through-hole | — |
| Versorgungsspannung | [DATA_NEEDED: supply voltage] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (NE5532x commercial) |
| Manufacturer | — | Texas Instruments |
| Part Number | — | NE5532AP |
| Number of Channels | — | 2 (Dual) |
| Gehäuse / Bauform | — | 8-PDIP (through-hole, 2.54 mm pitch) |
| Supply Voltage (Dual) | — | ±5 V to ±15 V (max ±18 V) |
| Unity-Gain Bandwidth | — | 10 MHz (typ.) |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz (typ. at 1 kHz) |
| Common-Mode Rejection Ratio (CMRR) | — | 100 dB (typ.) |
| DC Voltage Gain | — | 100 V/mV (typ., 100 dB) |
| Peak-to-Peak Output Swing | — | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |
| Montageart | — | Through-Hole (PDIP) |
| RoHS-Status | — | Compliant (Pb-free) |