NE5532N vs NE5532AP Comparaison
Comparaison détaillée côte à côte de NE5532N par onsemi et NE5532AP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ ActifComparaison des spécifications
| Paramètre | NE5532N | NE5532AP |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $0,49 |
| Product Type | Dual internally compensated operational amplifier | — |
| Number of Circuits | 2 | — |
| Amplifier Type | General Purpose | Low-Noise Operational Amplifier |
| Boîtier | 8-PDIP (0.300 in, 7.62 mm) | — |
| Packaging | Tube | — |
| Gain Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/µs | [DATA_NEEDED: slew rate V/us] |
| Compensation | Internal frequency compensation | — |
| Noise Performance | Low noise | — |
| Output Drive | Improved output-drive capability | 600 ohm loads (typ.) |
| Small-Signal Bandwidth | High small-signal bandwidth | — |
| Power Bandwidth | High power bandwidth | — |
| Style de montage | Through-hole | — |
| Tension d'alimentation | [DATA_NEEDED: supply voltage] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (NE5532x commercial) |
| Manufacturer | — | Texas Instruments |
| Part Number | — | NE5532AP |
| Number of Channels | — | 2 (Dual) |
| Boîtier / Format | — | 8-PDIP (through-hole, 2.54 mm pitch) |
| Supply Voltage (Dual) | — | ±5 V to ±15 V (max ±18 V) |
| Unity-Gain Bandwidth | — | 10 MHz (typ.) |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz (typ. at 1 kHz) |
| Common-Mode Rejection Ratio (CMRR) | — | 100 dB (typ.) |
| DC Voltage Gain | — | 100 V/mV (typ., 100 dB) |
| Peak-to-Peak Output Swing | — | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |
| Type de montage | — | Through-Hole (PDIP) |
| Statut RoHS | — | Compliant (Pb-free) |