NE5532NG vs NE5532AP Vergleich
Detaillierter Direktvergleich von NE5532NG von onsemi und NE5532AP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ AktivSpezifikationsvergleich
| Parameter | NE5532NG | NE5532AP |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Internally compensated dual low-noise operational amplifier | — |
| Manufacturer | onsemi | Texas Instruments |
| MPN | NE5532NG | — |
| Amplifier Circuit | Dual, 2 amplifier sections | — |
| Supply Voltage Range | 3 V to 20 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Gehäuse | 8-PDIP | — |
| Pin-Anzahl | 8 pins | — |
| Montageart | Through-hole, PDIP | Through-Hole (PDIP) |
| Compensation | Internal | — |
| Performance Class | Standard general-purpose amplifier | — |
| Temperature Grade | Commercial temperature grade | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (NE5532x commercial) |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | 10 MHz (typ.) |
| Maximum Output Swing Bandwidth | [DATA_NEEDED: maximum output swing bandwidth] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Current Noise Density | [DATA_NEEDED: current noise density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate V/us] |
| Output Drive Capability | High; numeric rating not provided | — |
| Distortion | Low; numeric limit not provided | — |
| Input Protection Diodes | Present | — |
| RoHS-Status | RoHS-compliant according to distributor product information | Compliant (Pb-free) |
| Lead-Free Status | Lead-free according to distributor product information | — |
| Datasheet Length | 10 pages | — |
| Part Number | — | NE5532AP |
| Amplifier Type | — | Low-Noise Operational Amplifier |
| Number of Channels | — | 2 (Dual) |
| Gehäuse / Bauform | — | 8-PDIP (through-hole, 2.54 mm pitch) |
| Supply Voltage (Dual) | — | ±5 V to ±15 V (max ±18 V) |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz (typ. at 1 kHz) |
| Common-Mode Rejection Ratio (CMRR) | — | 100 dB (typ.) |
| DC Voltage Gain | — | 100 V/mV (typ., 100 dB) |
| Peak-to-Peak Output Swing | — | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) |
| Output Drive | — | 600 ohm loads (typ.) |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |