NE5532NG vs NE5532AP Comparaison
Comparaison détaillée côte à côte de NE5532NG par onsemi et NE5532AP par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ ActifComparaison des spécifications
| Paramètre | NE5532NG | NE5532AP |
|---|---|---|
| Marque | onsemi | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Internally compensated dual low-noise operational amplifier | — |
| Manufacturer | onsemi | Texas Instruments |
| MPN | NE5532NG | — |
| Amplifier Circuit | Dual, 2 amplifier sections | — |
| Supply Voltage Range | 3 V to 20 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Boîtier | 8-PDIP | — |
| Nombre de broches | 8 pins | — |
| Type de montage | Through-hole, PDIP | Through-Hole (PDIP) |
| Compensation | Internal | — |
| Performance Class | Standard general-purpose amplifier | — |
| Temperature Grade | Commercial temperature grade | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C (NE5532x commercial) |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | 10 MHz (typ.) |
| Maximum Output Swing Bandwidth | [DATA_NEEDED: maximum output swing bandwidth] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Current Noise Density | [DATA_NEEDED: current noise density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate V/us] |
| Output Drive Capability | High; numeric rating not provided | — |
| Distortion | Low; numeric limit not provided | — |
| Input Protection Diodes | Present | — |
| Statut RoHS | RoHS-compliant according to distributor product information | Compliant (Pb-free) |
| Lead-Free Status | Lead-free according to distributor product information | — |
| Datasheet Length | 10 pages | — |
| Part Number | — | NE5532AP |
| Amplifier Type | — | Low-Noise Operational Amplifier |
| Number of Channels | — | 2 (Dual) |
| Boîtier / Format | — | 8-PDIP (through-hole, 2.54 mm pitch) |
| Supply Voltage (Dual) | — | ±5 V to ±15 V (max ±18 V) |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz (typ. at 1 kHz) |
| Common-Mode Rejection Ratio (CMRR) | — | 100 dB (typ.) |
| DC Voltage Gain | — | 100 V/mV (typ., 100 dB) |
| Peak-to-Peak Output Swing | — | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) |
| Output Drive | — | 600 ohm loads (typ.) |
| Input Protection | — | Input-protection diodes |
| Output Protection | — | Output short-circuit protection |